5 Practical Tips for Wheelchair Placement
Time：Oct 11,2025
After the casters are installed, proper arrangement not only enhances the equipment's mobility efficiency but also extends its service life. Depending on different usage requirements, here are 5 common caster arrangement techniques:
1. Slight steering requirement: Front-and-rear hybrid arrangement
If the device primarily moves in a straight line but occasionally requires slight directional adjustments, it is recommended to adopt a "forward-facing, rear-steering" layout.
Recommended specifications:
Install two directional casters (non-steerable) at one end.
Install two universal casters (freely rotatable) at the other end.
This approach ensures both straight-line stability and effortless steering.
2. High maneuverability requirement: Omnidirectional rotating arrangement
When the equipment needs flexible rotation or in-place turning, a full omnidirectional caster arrangement can be used.
Recommended specifications:
Universal casters are installed at all four corners.
Important Notes:
Highly maneuverable, but relatively difficult to control.
It is recommended that the load weight should not be too heavy to ensure safety.
3. Heavy-duty equipment: Six-wheel configuration provides greater stability
For heavier equipment or devices with significant pushing resistance, it is recommended to adopt a six-wheel arrangement, balancing both stability and maneuverability.
Recommended specifications:
Four-corner mounted swivel casters
Two directional casters are installed in the middle of the longer side, and their size is slightly larger than that of universal casters.
This arrangement helps maintain equipment balance while also delivering improved steering performance.
4. Cost Optimization: Four-Wheel Steering Configuration
If your budget is limited but you still want to balance mobility with load capacity, you can opt for a "diamond" arrangement.
Recommended specifications:
Two directional casters are installed in the middle of the long side.
Two universal casters are installed at both ends of the short side.
This structure forms a stable "diamond-shaped" support that not only saves costs but also meets basic mobility needs.
5. Light Load, Short Distance: Four-Wheel Directional Arrangement
For devices with light loads and short-distance movements, a fully omnidirectional caster arrangement can be used—it’s simple and practical.
Recommended specifications:
Four directional casters
The two casters on the long side are slightly larger in size than those on the short side, allowing for gentle steering.
Suitable for short-distance handling tasks on flat surfaces such as warehouses and workshops.
Summary:
The arrangement of casters should be flexibly chosen based on factors such as load weight, travel distance, and steering frequency. A well-designed caster configuration not only enhances operational efficiency but also effectively reduces equipment wear and minimizes handling risks.
If you have a specific use case, I can also help you customize the most suitable caster arrangement plan.
Previous article
Previous article
Sweep the attention
Universal Caster
FOSHAN Globe Caster Co., Ltd.
Telephone: 86-757-86692299
Mobile:86-137 0966 5707
E-mail:sales@globe-castor.com
Fax: 86-757-86690681
Website:www.globe-castor.com
Address: 599 Yangxi Avenue, Yanghe Town, Gaoming District, Foshan City, Guangdong Province, China
Copyright©2024 FOSHAN Globe Caster Co., Ltd. All Rights Reserved