All
  • All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas

Why do casters need to undergo chemical resistance testing? Don’t let cleaning agents become a hidden threat to caster surface damage.

Time:Nov 20,2026

The same caster may perform normally in a standard workshop, but after exposure to certain chemicals, it can swell, soften, or even develop surface cracks. Where exactly does the problem lie?

In applications such as chemical production, food processing, laboratory equipment, and industrial cleaning, casters must not only support loads and facilitate movement but may also be exposed to detergents, lubricants, solvents, and other chemical media.

Many procurement professionals focus on the material of the wheel face but often overlook compatibility between the material and the chemical medium.

In fact, even for the same material, different formulations, concentrations, and contact conditions can lead to vastly different performance in use.

Today, we will examine the chemical resistance of casters from three perspectives: material properties, testing methods, and practical selection.

01|Why do chemicals affect caster performance?

Common caster wheel materials include polyurethane, rubber, and nylon.

These materials have different chemical structures, so their resistance to acids, bases, oils, and organic solvents varies.

When the wheel tread is exposed to unsuitable chemical media for extended periods, the following changes may occur:

Volumetric expansion: After a material absorbs part of the medium, its dimensions change.

Surface softening: A reduction in the material’s hardness or mechanical properties.

Cracking or embrittlement: The material’s structure is compromised, and cracks gradually appear on the surface.

Performance degradation: Even if the appearance shows no obvious changes, the material’s strength and elasticity may still be affected.

It should be noted that not all changes can be directly observed with the naked eye.

Therefore, the apparent integrity of the wheel tread alone cannot demonstrate the material’s long-term suitability in a specific chemical environment.

02|Even among polyurethanes, chemical resistance can vary.

When purchasing casters, you often encounter this question:

“These casters are made of polyurethane. Can they come into contact with oil or cleaning agents?”

In fact, polyurethane is not a single material with uniformly consistent properties.

Different polyurethane systems vary in their chemical structure, formulation, and processing methods, which can lead to differences in their resistance to hydrolysis, oils, and solvents.

The same holds true for rubber materials.

For example, different rubber formulations may exhibit significantly varying degrees of resistance to oils, detergents, and other media.

Therefore, when determining whether a caster is resistant to chemicals, one should not rely solely on material names such as “polyurethane” or “rubber”; it is also necessary to consider the specific material system and the medium with which it will come into contact.

03 | Chemical Resistance Testing: Which Parameters Are Typically Evaluated?

For casters that may be exposed to chemical media, material compatibility can be verified according to actual service requirements.

Common evaluation areas include:

① Appearance changes

Observe whether the material exhibits discoloration, blistering, cracking, surface tackiness, or other abnormalities after contact with the medium.

② Changes in Quality and Dimensions

By comparing the mass and dimensions before and after the test, determine whether the material has undergone significant absorption, swelling, or other changes.

③ Hardness change

The hardness of a material may change when it is exposed to a chemical medium.

However, changes in hardness do not fully reflect a material’s properties and must be evaluated in conjunction with other metrics.

④ Changes in Mechanical Properties

For critical applications, the material’s tensile properties, strength, or other relevant mechanical parameters can be further evaluated.

It should be emphasized that immersion testing of material samples is not the same as verifying the actual use of a complete caster.

Material testing can help screen formulations, but whether the entire wheel is suitable also depends on the compatibility of the wheel core, connection structure, and other components.

04 | When purchasing, why shouldn’t you just ask, “Is it resistant to acids and alkalis?”

“Acid and alkali resistance” is too broad a description.

Even if different chemicals are all acidic or alkaline, their mechanisms of action may differ.

At the same time, medium concentration, temperature, contact time, and cleaning frequency all affect the material’s actual performance.

Therefore, before making a purchase, it is advisable to clarify the following information:

First, what specific medium are we dealing with?

Provide the chemical name, main ingredients, or the relevant safety data sheet whenever possible.

Second, what is the exposure concentration?

The diluted cleaning solution and the high-concentration concentrate may have different effects on materials.

Third, what is the mode of contact?

Occasional splashing, regular wiping, short-term soaking, and long-term soaking all impose different requirements on the material.

Fourth, what is the ambient operating temperature?

Temperature variations can influence the interaction processes between chemical media and materials.

Fifth, is sample verification required?

For equipment with complex operating conditions or severe failure consequences, validation under representative conditions should be considered.

05 | If an abnormality is detected on the wheel tread, how should it be handled?

If the casters show noticeable softening, swelling, cracking, or other abnormalities after exposure to chemicals, discontinue use immediately and inspect them.

First, confirm the actual chemical media in contact and the operating conditions.

Next, inspect the wheel surface and other components that may come into contact with the medium to determine the extent of the damage.

If necessary, compare the defective product with unused samples and contact the supplier to conduct a material compatibility analysis.

It is not advisable to conclude that the problem has been resolved simply by replacing the wheels with ones made of the same material.

If the material system is incompatible with the service medium, the same problem may recur.

Conclusion | Only by selecting the right materials can you meet real-world operating conditions.

The choice of material for casters affects not only load-bearing and mobility performance but also directly influences the product’s suitability for use in specialized environments.

For equipment that may come into contact with chemical media, verifying material compatibility in advance is far more practical than repeatedly replacing casters after problems arise.

Chemical resistance is not a vague claim of “acid and alkali resistance”; rather, it involves a specific match among the material, the medium, and the service conditions.

GLOBE Universal Casters | Focusing on industrial application details to make equipment movement more reliable.